Very bad experience with WD8RYH aka W8DSR
Posted: Wed Jun 16, 2010 1:09 pm
From thread: http://chat.qth.com/viewtopic.php?t=7986
Listing Number: 817056
Date Ad was Placed: 04/07/10
Name: DAVID ROBERTS
Phone Number: 313 978 9922
Callsign: WD8RYH
Category: AMPHF
Heading: DENTRON 2500
Ad Message:
CUSTOM AMP BUILT WITH 4cx800 X 2 EASY LEAGAL OUTPUT 1000 PLUS 35 WATT DRIVE (600 DOLLARS) PLUS SHIPPING)
HAVE EXTRA DENTRON PLATE TRANSFORMER (100) PLUS SHIPPING
I recently had a bad experience with Dave WD8RYH aka W8DSR. It took him 3 weeks to ship the amp to me. The amp was in below average condition and not packed very good. There was very little packing tape on top of box to the point it had opened when I received it. I am lucky it had made it here in one piece and not fallen out of the box. After inspecting it, I turn it on and within 5 minutes the filter caps blow and take several resistors with it. I had not even hooked it up and put a load on it yet. The conversion was the reason I bought the amp. But I had to clean up most of the wiring, solder joints, and put about $60 into it to get it working.
I am still trying to complete this deal with him and get the schematics on the conversion more than a month after the sale.
BEWARE DON'T GET RIPPED OFF.
Listing Number: 817056
Date Ad was Placed: 04/07/10
Name: DAVID ROBERTS
Phone Number: 313 978 9922
Callsign: WD8RYH
Category: AMPHF
Heading: DENTRON 2500
Ad Message:
CUSTOM AMP BUILT WITH 4cx800 X 2 EASY LEAGAL OUTPUT 1000 PLUS 35 WATT DRIVE (600 DOLLARS) PLUS SHIPPING)
HAVE EXTRA DENTRON PLATE TRANSFORMER (100) PLUS SHIPPING
I recently had a bad experience with Dave WD8RYH aka W8DSR. It took him 3 weeks to ship the amp to me. The amp was in below average condition and not packed very good. There was very little packing tape on top of box to the point it had opened when I received it. I am lucky it had made it here in one piece and not fallen out of the box. After inspecting it, I turn it on and within 5 minutes the filter caps blow and take several resistors with it. I had not even hooked it up and put a load on it yet. The conversion was the reason I bought the amp. But I had to clean up most of the wiring, solder joints, and put about $60 into it to get it working.
I am still trying to complete this deal with him and get the schematics on the conversion more than a month after the sale.
BEWARE DON'T GET RIPPED OFF.