Page 1 of 1

Kenwood TS-830S jumpy tuning on main VFO

Posted: Tue Jun 29, 2004 7:28 pm
by K5BW
My TS-830S has erratic tuning while using the main VFO tuning knob. It won't respond then jumps frequency. It works great with my external VFO.
Has anyone had this problem and if so what is the fix? :?: :?:

Any help would be great. :!:

Thanks
Benn (K5BW)

kwd-830-s

Posted: Wed Jun 30, 2004 4:01 am
by wa4cch
hi you might try cleaning all the conectors going to the vfo remove one at a time squrt with a little cleaner replace and move up and down a couple of times this worked on mine
73 de chuck

TS-830

Posted: Thu Jul 22, 2004 5:39 pm
by KD8OK
I had a similar problem a number of years ago with my 830. The problem was resolved by adding lock washers to the VFO board.

I believe that Kenwood had a service bulletin for this, but that was a number of years ago.

Good luck!