Alinco DJ-175

Just what it says -- this is the place for any discussions not related to Buying, Selling and Trading ham gear. The discussion must be related to Ham Radio.
Post Reply
W9LCL
Posts: 26
Joined: Tue Jul 07, 2009 1:46 pm

Alinco DJ-175

Post by W9LCL »

I just unpacked my new Alinco DJ-175 and like it very much. I hope someone experienced with this HT can help me with a question which I have, even after reading the owner's manual several times.

The DJ-175 transmits and receives between 144 and 147.995 MHz (2-meter band). It scans from 136 to 173.995 MHz--a much greater range than I have any use for.

Is there a way to program the DJ-175 to limit the scan to 144 and 147.995 MHz?

Any help you can give me would be sincerely appreciated. Thank you and 73s.

Thomas F. Novotny KC9PXK
tnovotnysr@sbcglobal.net
Top
wx1f
Posts: 257
Joined: Mon Jul 17, 2006 7:45 pm

Re: Alinco DJ-175

Post by wx1f »

Tom Novotny wrote:I just unpacked my new Alinco DJ-175 and like it very much. I hope someone experienced with this HT can help me with a question which I have, even after reading the owner's manual several times.

The DJ-175 transmits and receives between 144 and 147.995 MHz (2-meter band). It scans from 136 to 173.995 MHz--a much greater range than I have any use for.

Is there a way to program the DJ-175 to limit the scan to 144 and 147.995 MHz?

Any help you can give me would be sincerely appreciated. Thank you and 73s.

Thomas F. Novotny KC9PXK
tnovotnysr@sbcglobal.net
The DJ-175 has no provision for setting VFO scan limits.
Top
Post Reply

Return to “Free For All -- Talk about anything related to Ham Radio.”