Cleaning and lubing a roller inductor

Just what it says -- this is the place for any discussions not related to Buying, Selling and Trading ham gear. The discussion must be related to Ham Radio.
Post Reply
Posts: 11
Joined: Fri Jul 30, 2004 12:28 am

Cleaning and lubing a roller inductor

Post by W2TGR » Mon Dec 18, 2017 8:06 pm

There seems to be lots of questions about cleaning and lubing a roller inductor. Cleaning use either De-Oxit or alcohol. for lubricating I contacted Palstar...They kindly sent me some of their grease for my AT2K AND their grease formula.
3 parts graphite
1 part lithum grease
Hope that helps

Posts: 228
Joined: Fri Aug 12, 2005 11:35 pm
Location: northwest wisconsin

Re: Cleaning and lubing a roller inductor

Post by k9yli » Sat Dec 23, 2017 3:19 pm

I would guess electrical grease from electric supply/hardware store, used on aluminum wire connections,, also in auto work.. My suggestion is just rub some on your fingers to make them slightly
slick and wipe along the shaft. thus a very thin coat. At a slow speed, not much lub is needed.

Post Reply